Spare parts for Master DH 40
| Part number | Описание |
| 4140.601 | Bottom plate |
| 4140.604 | Capacitor support |
| 4140.607 | Switch cover |
| 4140.609 | Right cover plate |
| 4140.613 | Left cover plate |
| 4140.617 | Bottom front panel |
| 4140.620 | Grille |
| 4140.624 | Upper panel |
| 4140.628 | Drip tray support |
| 4140.630 | Wheel axle |
| 4140.633 | Foot |
| 4140.636 | Handle |
| 4140.638 | Switch support |
| 4140.641 | Motor flange |
| 4140.644 | Hygrostat cover |
| 4140.646 | Drip tray |
| 4140.649 | Wheel R264-20 |
| 4140.650 | Black plastic tap |
| 4140.652 | Spring washer R21 |
| 4140.653 | Washer R21 |
| 4140.654 | Foot protection |
| 4140.655 | Control box |
| 4140.656 | Probe |
| 4140.658 | Filter 270 x 404 |
| 4140.661 | Switch |
| 4140.662 | Clips and clamps |
| 4140.663 | Cable protection R10 |
| 4140.665 | Screw TE M6x30 |
| 4140.666 | Sleeve |
| 4140.668 | Washer R8xR24x2 |
| 4140.669 | Spring washer R8 |
| 4140.671 | Nut M8 |
| 4140.672 | Cable fastener |
| 4140.673 | Electrical cable 3x1 with plug |
| 4140.674 | Screw TBEI M8x40 Zn.B. |
| 4140.675 | Screw 8x1 |
| 4140.676 | Screw TC 8x3/8" |
| 4140.677 | Adesive profile 3x20 |
| 4140.678 | Adesive profile 20x20 |
| 4140.679 | Clip |
| 4140.680 | Screw TCEI M4x8 |
| 4140.681 | Washer R4 |
| 4140.685 | Fan motor 82-3016 |
| 4140.687 | Fan R230 28 |
| 4140.690 | Switch 1/0 |
| 4140.691 | Switch cover |
| 4140.692 | Red lamp V230-50 R12 |
| 4140.693 | Hour-counter |
| 4140.694 | Black plastic knob |
| 4140.695 | Hygrostat |
| 4140.696 | Cable protection R18 |
| 4140.700 | Solenoid valve Parker (body) |
| 4140.701 | Solenoid spool Parker |
| 4140.703 | Water container |
| 4140.704 | Float lever |
| 4140.705 | Plastic pipe R4xR6x60 mm |
| 4140.706 | Float support |
| 4140.707 | Float R60 |
| 4140.715 | Compressor Sanyo |
| 4140.718 | Capacitor |
| 4140.719 | Capacitor plastic cover R45 |
| 4140.720 | Thermostat |
| 4140.724 | Condenser/Evaporator |
| 4140.728 | RF 20/2 Dryer |
| 4140.731 | Capilary tube R1,83mm L=1,7m |